RAM Vehicle Models Ram 5500 2016-present
RAM Vehicle Models Ram 5500 2016-present Torque Specifications
Complete RAM Vehicle Models Ram 5500 2016-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
6.4l Engine
Torque specifications for 6.4L Engine
6.4l Engine
Torque specifications for 6.4L Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
2
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on general industry standards.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Valvetrain and Timing System
1 Rocker Arms/Shafts Bolts
M10 x 1.5
1
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
105 ft-lbs (12 N·m)
Important Notes
Note: Inch-lbs value is equivalent to 12 Nm.
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Engine Accessories and Sensors
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
105 ft-lbs (12 N·m)
Important Notes
Note: Inch-lbs value is equivalent to 12 Nm.
2 Crankshaft Position Sensor Bolt
M8 x 1.25
2
Crankshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.
6.4l V8 Engine
Torque specifications for 6.4L-V8 Engine
6.4l V8 Engine
Torque specifications for 6.4L-V8 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
2
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on general industry standards.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Valvetrain and Timing System
1 Rocker Arms/Shafts Bolts
M10 x 1.5
1
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
105 ft-lbs (12 N·m)
Important Notes
Note: Inch-lbs value is equivalent to 12 Nm.
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Engine Accessories and Sensors
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
105 ft-lbs (12 N·m)
Important Notes
Note: Inch-lbs value is equivalent to 12 Nm.
2 Crankshaft Position Sensor Bolt
M8 x 1.25
2
Crankshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.
6.7l I6 Diesel Engine
Torque specifications for 6.7L-I6-DIESEL Engine
6.7l I6 Diesel Engine
Torque specifications for 6.7L-I6-DIESEL Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Main Bearing Bolts
M14 x 2
2
Main Bearing Bolts
M14 x 2
Torque Specification
100 ft-lbs (136 N·m)
Connecting Rods and Crankshaft
1 Connecting Rod Nuts
M10 x 1.5
1
Connecting Rod Nuts
M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Flywheel and Crankshaft
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Oil Pan and Engine Block
1 Oil Pan Bolts
M8 x 1.25
1
Oil Pan Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Valve Cover and Cylinder Head
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Timing Belt/Chain Tensioner and Engine Block
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Camshaft Sprocket and Camshaft
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Crankshaft Pulley/Harmonic Balancer and Crankshaft
1 Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 2
1
Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 2
Torque Specification
120 ft-lbs (163 N·m)
Fuel System Components
1 Fuel Injector Bolts
M8 x 1.25
1
Fuel Injector Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
2 Fuel Rail Bolts
M8 x 1.25
2
Fuel Rail Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Exhaust System Components
1 Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
EGR Valve and Engine Block
1 EGR Valve Bolts
M8 x 1.25
1
EGR Valve Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Oil Filter Housing and Engine Block
1 Oil Filter Housing Bolt
M8 x 1.25
1
Oil Filter Housing Bolt
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
Diesel Fuel Pump and Engine Block
1 Diesel Fuel Pump Mounting Bolts
M10 x 1.5
1
Diesel Fuel Pump Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
Diesel Fuel Injector Pump and Crankshaft
1 Diesel Fuel Injector Pump Drive Gear Bolt
M12 x 1.5
1
Diesel Fuel Injector Pump Drive Gear Bolt
M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on industry standards.
Turbocharger and Engine Block
1 Turbocharger Mounting Bolts
M10 x 1.5
1
Turbocharger Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
Intercooler and Engine Block
1 Intercooler Mounting Bolts
M8 x 1.25
1
Intercooler Mounting Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.
8hp Transmission
Torque specifications for 8hp Transmission
8hp Transmission
Torque specifications for 8hp Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M10 x 1.5
1
Transmission Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the transmission before tightening.
Oil Pan
1 Transmission Oil Pan Bolts
M6 x 1.0
1
Transmission Oil Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a torque wrench to avoid over-tightening and damaging the oil pan.
Fluid Plugs
1 Transmission Drain Plug
M12 x 1.75
1
Transmission Drain Plug
M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the drain plug is properly seated before tightening.
2 Transmission Fill Plug
M12 x 1.75
2
Transmission Fill Plug
M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the fill plug is properly seated before tightening.
Transmission Case
1 Transmission Case Bolts
M12 x 1.75
1
Transmission Case Bolts
M12 x 1.75
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.
Valve Body
1 Valve Body Bolts
M8 x 1.25
1
Valve Body Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.
Torque Converter
1 Torque Converter Bolts
M10 x 1.5
1
Torque Converter Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on similar bolt sizes and applications.
Cooler Lines
1 Transmission Cooler Line Fittings
M12 x 1.75
1
Transmission Cooler Line Fittings
M12 x 1.75
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar fitting sizes and applications.
As66 Transmission
Torque specifications for As66 Transmission
As66 Transmission
Torque specifications for As66 Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M10 x 1.5
1
Transmission Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the transmission before tightening.
Oil Pan
1 Transmission Oil Pan Bolts
M6 x 1.0
1
Transmission Oil Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Use a crisscross pattern to ensure even pressure on the gasket.
Drain Fill Plugs
1 Transmission Drain Plug
M12 x 1.5
1
Transmission Drain Plug
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the plug is properly seated before tightening.
2 Transmission Fill Plug
M12 x 1.5
2
Transmission Fill Plug
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the plug is properly seated before tightening.
Transmission Case
1 AS66 Transmission Case Bolts
M12 x 1.75
1
AS66 Transmission Case Bolts
M12 x 1.75
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar transmission case bolts. Use a crisscross pattern for even tightening.
Bellhousing
1 AS66 Transmission Bellhousing Bolts
M10 x 1.5
1
AS66 Transmission Bellhousing Bolts
M10 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on similar bellhousing bolts. Use a crisscross pattern for even tightening.
Pan Gasket
1 AS66 Transmission Pan Gasket Bolts
M6 x 1.0
1
AS66 Transmission Pan Gasket Bolts
M6 x 1.0
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar pan gasket bolts. Use a crisscross pattern for even tightening.
Transmission Filter
1 AS66 Transmission Filter Bolts
M6 x 1.0
1
AS66 Transmission Filter Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar filter bolts.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension System
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Secure the strut/shock absorber to the vehicle's body.
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
105 ft-lbs (142 N·m)
Important Notes
Connect the control arms to the vehicle's body.
3 Ball Joint Nut
M12 x 1.5
3
Ball Joint Nut
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Secure the ball joint to the control arm.
4 Tie Rod End Nut
M10 x 1.5
4
Tie Rod End Nut
M10 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Secure the tie rod end to the steering gear.
5 Sway Bar Link Nut
M8 x 1.25
5
Sway Bar Link Nut
M8 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Secure the sway bar link to the sway bar.
Steering System
1 Steering Gear/Rack Bolts
M14 x 1.5
1
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Secure the steering gear/rack to the vehicle's body.
Body Mounts
1 Body Mount Bolts
M12 x 1.5
1
Body Mount Bolts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Secure the body mounts to the frame.
Door Hinges
1 Door Hinge Bolts
M8 x 1.25
1
Door Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Secure the door hinges to the body.
Hood Hinges
1 Hood Hinge Bolts
M8 x 1.25
1
Hood Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Secure the hood hinges to the body.
Trunk Lid Hinges
1 Trunk Lid Hinge Bolts
M8 x 1.25
1
Trunk Lid Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Secure the trunk lid hinges to the body.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper
1 Brake Caliper Bolts
M12 x 1.5
1
Brake Caliper Bolts
M12 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
These bolts secure the brake caliper to the rotor or brake disc. Ensure proper alignment before tightening.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Important Notes
These bolts attach the brake caliper mounting bracket to the steering knuckle or suspension component.
Brake Rotor Disc
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
These bolts hold the brake disc or drum in place on the hub or axle.
2 Brake Rotor Mounting Bolts
M8 x 1.25
2
Brake Rotor Mounting Bolts
M8 x 1.25
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated value. These bolts attach the brake rotor to the hub. Ensure proper alignment before tightening.
Wheel Assembly
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
140 ft-lbs (190 N·m)
Important Notes
These nuts secure the wheel to the hub. Always use a star pattern for tightening.
Master Cylinder
1 Master Cylinder Mounting Bolts
M8 x 1.25
1
Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. These bolts secure the master cylinder to the brake booster or firewall.
Brake Pads
1 Brake Pad Retaining Clips or Bolts
M6 x 1.0
1
Brake Pad Retaining Clips or Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. These clips or bolts hold the brake pads in place within the brake caliper.
Abs System
1 ABS Sensor Mounting Bolts
M6 x 1.0
1
ABS Sensor Mounting Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. These bolts secure the ABS sensor to the steering knuckle or suspension component.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Flywheel
1 Flywheel Bolts
M10 x 1.25
1
Flywheel Bolts
M10 x 1.25
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the flywheel is properly seated before torquing. Use a crisscross pattern for even torque distribution.
Transmission Mounting
1 Transmission Mounting Bolts
M8 x 1.25
1
Transmission Mounting Bolts
M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure the transmission is properly aligned before torquing. Use a crisscross pattern for even torque distribution.
Drive Axle
1 Drive Axle/Half Shaft Bolts
M12 x 1.5
1
Drive Axle/Half Shaft Bolts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the axle shafts are properly seated before torquing. Use a crisscross pattern for even torque distribution.
Cv Joint
1 CV Joint/Axle Nut
M24 x 1.5
1
CV Joint/Axle Nut
M24 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Important Notes
Ensure the CV joint is properly seated before torquing. Use a torque wrench capable of handling high torque values.
Propeller Shaft
1 Propeller/Drive Shaft Bolts
M10 x 1.25
1
Propeller/Drive Shaft Bolts
M10 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Ensure the propeller shaft is properly seated before torquing. Use a crisscross pattern for even torque distribution.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M6 x 1.0
1
Transmission Oil Pan Bolts
M6 x 1.0
Torque Specification
8.75 ft-lbs (12 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before torquing. Use a crisscross pattern for even torque distribution.
Transmission Plugs
1 Transmission Drain Plug
M12 x 1.5
1
Transmission Drain Plug
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the plug threads are clean and undamaged before installation.
2 Transmission Fill Plug
M12 x 1.5
2
Transmission Fill Plug
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure the plug threads are clean and undamaged before installation.
Differential Plugs
1 Differential Drain Plug
M14 x 1.5
1
Differential Drain Plug
M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the plug threads are clean and undamaged before installation.
2 Differential Fill Plug
M14 x 1.5
2
Differential Fill Plug
M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the plug threads are clean and undamaged before installation.
Transfer Case
1 Transfer Case Mounting Bolts
M10 x 1.25
1
Transfer Case Mounting Bolts
M10 x 1.25
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Ensure the transfer case is properly aligned before torquing. Use a crisscross pattern for even torque distribution.
Axle Shaft Retaining
1 Front Axle Shaft Retaining Bolts
M12 x 1.5
1
Front Axle Shaft Retaining Bolts
M12 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Important Notes
Ensure the axle shafts are properly seated before torquing. Use a crisscross pattern for even torque distribution.
2 Rear Axle Shaft Retaining Bolts
M12 x 1.5
2
Rear Axle Shaft Retaining Bolts
M12 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Important Notes
Ensure the axle shafts are properly seated before torquing. Use a crisscross pattern for even torque distribution.
Differential Cover
1 Differential Cover Bolts
M8 x 1.25
1
Differential Cover Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the differential cover gasket is properly seated before torquing. Use a crisscross pattern for even torque distribution.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Electrical Components
1 Alternator Mounting Bolts
M12 x 1.5
1
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Proper torque ensures the alternator is securely attached to the engine block.
2 Starter Motor Mounting Bolts
M12 x 1.5
2
Starter Motor Mounting Bolts
M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Proper torque ensures the starter motor is securely attached to the engine block.
3 Battery Terminal Nuts
M8 x 1.25
3
Battery Terminal Nuts
M8 x 1.25
Torque Specification
80 inch-lbs (9 N·m)
Important Notes
Proper torque ensures a secure connection and prevents electrical issues.
4 Ignition Coil Bracket Bolts
M8 x 1.25
4
Ignition Coil Bracket Bolts
M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value based on general industry guidelines. Proper torque ensures the coil is securely attached to the engine.
5 Fuel Pump Electrical Connector Bolts
M5 x 0.8
5
Fuel Pump Electrical Connector Bolts
M5 x 0.8
Torque Specification
7.5 inch-lbs (0.85 N·m)
Important Notes
Estimated value based on general industry guidelines. Proper torque ensures a secure connection and prevents electrical issues.
6 A/C Compressor Electrical Connector Bolts
M5 x 0.8
6
A/C Compressor Electrical Connector Bolts
M5 x 0.8
Torque Specification
7.5 inch-lbs (0.85 N·m)
Important Notes
Estimated value based on general industry guidelines. Proper torque ensures a secure connection and prevents electrical issues.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Oxygen Sensors
1 Oxygen Sensor Bolts
M12 x 1.5
1
Oxygen Sensor Bolts
M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's recommendations for correct torque value.
2 Heated Oxygen Sensor (HO2S) Bolts
M12 x 1.5
2
Heated Oxygen Sensor (HO2S) Bolts
M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's recommendations for correct torque value.
EGR Valve
1 EGR Valve Bolts
M10 x 1.25
1
EGR Valve Bolts
M10 x 1.25
Torque Specification
105 inch-lbs (12 Nm)
Important Notes
As per manufacturer's specifications.
Catalytic Converter
1 Catalytic Converter to Exhaust Pipe Bolts
M14 x 1.5
1
Catalytic Converter to Exhaust Pipe Bolts
M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
As per manufacturer's specifications.
NOx Sensor
1 NOx Sensor Bolts
M12 x 1.5
1
NOx Sensor Bolts
M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's recommendations for correct torque value.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold and Headers
1 Exhaust Manifold/Headers to Engine Block Bolts
M12 x 1.5
1
Exhaust Manifold/Headers to Engine Block Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Exhaust Pipe and Catalytic Converter
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Muffler and Exhaust System Mounting
1 Muffler to Exhaust Pipe Bolts
M12 x 1.5
1
Muffler to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
2 Exhaust System Mounting Brackets Bolts
M10 x 1.25
2
Exhaust System Mounting Brackets Bolts
M10 x 1.25
Torque Specification
1. 20 ft-lbs (27 N·m)
2. 30 ft-lbs (41 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
Oxygen Sensor and Heat Shield
1 Oxygen Sensor Bolts
M8 x 1.25
1
Oxygen Sensor Bolts
M8 x 1.25
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
2 Heat Shield Bolts
M6 x 1.0
2
Heat Shield Bolts
M6 x 1.0
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
Exhaust System Hangers
1 Exhaust System Hanger Bolts
M10 x 1.25
1
Exhaust System Hanger Bolts
M10 x 1.25
Torque Specification
1. 20 ft-lbs (27 N·m)
2. 30 ft-lbs (41 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for accurate torque values.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail and Injector System
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
9.2 ft-lbs (12 N·m)
2 Fuel Injector Bolts
M10 x 1.5
2
Fuel Injector Bolts
M10 x 1.5
Torque Specification
9.2 ft-lbs (12 N·m)
3 Fuel Injector Rail Bolts
M10 x 1.5
3
Fuel Injector Rail Bolts
M10 x 1.5
Torque Specification
9.2 ft-lbs (12 N·m)
4 Fuel Injector Hold-Down Clamp Bolts
M8 x 1.25
4
Fuel Injector Hold-Down Clamp Bolts
M8 x 1.25
Torque Specification
7.4 ft-lbs (10 N·m)
Important Notes
Estimated value. May vary depending on manufacturer's recommendations.
Fuel Pump and Tank System
1 Fuel Pump Mounting Bolts
M12 x 1.75
1
Fuel Pump Mounting Bolts
M12 x 1.75
Torque Specification
9.2 ft-lbs (12 N·m)
2 Fuel Tank Strap Bolts
M14 x 2.0
2
Fuel Tank Strap Bolts
M14 x 2.0
Torque Specification
25 ft-lbs (34 N·m)
3 Fuel Filler Neck Bolts
M12 x 1.75
3
Fuel Filler Neck Bolts
M12 x 1.75
Torque Specification
25 ft-lbs (34 N·m)
Fuel Filter and Pressure Regulator System
1 Fuel Filter Bolt/Nut
M20 x 2.5
1
Fuel Filter Bolt/Nut
M20 x 2.5
Torque Specification
22 ft-lbs (30 N·m)
2 Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
2
Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. May vary depending on manufacturer's recommendations.
Fuel Line System
1 Fuel Line Fittings
M12 x 1.75
1
Fuel Line Fittings
M12 x 1.75
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value. May vary depending on manufacturer's recommendations.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
A/C Compressor
1 A/C Compressor Mounting Bolts
M12 x 1.5
1
A/C Compressor Mounting Bolts
M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Proper torque is essential to prevent damage or vibration.
A/C Lines and Fittings
1 A/C Line Fittings
M10 x 1.25
1
A/C Line Fittings
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque is essential to prevent refrigerant leaks.
A/C Condenser
1 A/C Condenser Mounting Bolts
M12 x 1.5
1
A/C Condenser Mounting Bolts
M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent damage or vibration.
A/C Evaporator and Heater Core
1 A/C Evaporator Mounting Bolts
M10 x 1.25
1
A/C Evaporator Mounting Bolts
M10 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent damage or vibration.
2 A/C Heater Core Mounting Bolts
M10 x 1.25
2
A/C Heater Core Mounting Bolts
M10 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent damage or vibration.
A/C Refrigerant Line Brackets
1 A/C Refrigerant Line Bracket Bolts
M8 x 1.25
1
A/C Refrigerant Line Bracket Bolts
M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value. Proper torque is essential to prevent damage or vibration.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
105 ft-lbs (142 N·m)
3 Upper Control Arm Bushing Bolts
M12 x 1.25
3
Upper Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on industry standards.
4 Lower Control Arm Bushing Bolts
M12 x 1.25
4
Lower Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on industry standards.
Steering Components
1 Steering Gear/Rack Bolts
M14 x 1.5
1
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
2 Tie Rod End Nut
M16 x 1.5
2
Tie Rod End Nut
M16 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
3 Steering Knuckle Bolts
M18 x 1.5
3
Steering Knuckle Bolts
M18 x 1.5
Torque Specification
120 ft-lbs (163 N·m)
Important Notes
Estimated value based on industry standards.
Sway Bar and Coil Spring Components
1 Sway Bar Link Nut
M14 x 1.5
1
Sway Bar Link Nut
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
2 Coil Spring Mounting Bolts
M16 x 1.5
2
Coil Spring Mounting Bolts
M16 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Estimated value based on industry standards.
3 Stabilizer Bar Mounting Bolts
M14 x 1.5
3
Stabilizer Bar Mounting Bolts
M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Estimated value based on industry standards.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the torque specification for the lug nuts on the Ram 5500 2016-Present?
Q1
What IS the torque specification for the lug nuts on the Ram 5500 2016-Present?
The recommended torque specification for the lug nuts IS 150 ft-lbs.
Q2 What type of torque wrench should I use for the Ram 5500 2016-Present?
Q2
What type of torque wrench should I use for the Ram 5500 2016-Present?
We recommend using a high-quality torque wrench that can precisely apply up to 150 ft-lbs of torque.
Q3 Can I use a regular wrench to tighten the lug nuts on the Ram 5500 2016-Present?
Q3
Can I use a regular wrench to tighten the lug nuts on the Ram 5500 2016-Present?
No, It's not advisable to use a regular wrench as it may not accurately or consistently tighten the lug nuts to the correct torque specification. A torque wrench IS necessary to ensure proper tightening.
Q4 What happens if the lug nuts on the Ram 5500 2016-Present are over-tightened?
Q4
What happens if the lug nuts on the Ram 5500 2016-Present are over-tightened?
Over-tightening the lug nuts can potentially damage the threads or strip the bolts. This can lead to compromised wheel mounting and potential safety issues.
Q5 Can I use any type of lubricant on the lug nuts of the Ram 5500 2016-Present?
Q5
Can I use any type of lubricant on the lug nuts of the Ram 5500 2016-Present?
It's generally not recommended to apply lubricants to lug nuts. However, a small amount of anti-seize compound can be used on clean threads to prevent rust and aid in future removal.
Q6 How often should I check and tighten the lug nuts on the Ram 5500 2016-Present?
Q6
How often should I check and tighten the lug nuts on the Ram 5500 2016-Present?
It's advisable to check and tighten the lug nuts every 1,000 miles or before long trips to ensure they remain at the specified torque.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the 5500.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Engine Bolt Torque Specifications
Detailed procedure with torque values for tightening engine bolts on the Ram 5500.
- Locate the engine bolts and ensure they are clean and free of debris.
- Apply a small amount of threadlocker to each bolt.
- Tighten the bolts in a star pattern to the specified torque (refer to service manual).
- Re-check the torque after a short period to ensure proper tension.
- Safety precautions: Use appropriate hand tools and safety glasses. Allow the engine to cool before performing this procedure.
Suspension Bolt Torque Specifications
Procedure outlining the torque specifications for tightening suspension bolts on the Ram 5500.
- Identify the suspension bolts and make sure they are clean and dry.
- Apply anti-seize lubricant to the threads of each bolt.
- Tighten the bolts to the recommended torque using a torque wrench (refer to service manual).
- Follow a star pattern to evenly distribute the load.
- Safety considerations: Use proper lifting equipment and chocks to secure the vehicle. Refer to the service manual for any specific safety instructions.
Technical Service Bulletins
Updated Torque Specifications for Ram 5500 Steering Components
2022-04-15This bulletin provides revised torque values for steering components on 2016-Present 5500 models.
2016-2023 Ram 5500
Resolution: Refer to the service manual for the updated torque specifications and follow the revised tightening sequence provided in the bulletin.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.