RAM Vehicle Models Ram 1500 2009-2018
RAM Vehicle Models Ram 1500 2009-2018 Torque Specifications
Complete RAM Vehicle Models Ram 1500 2009-2018 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
3.6l Engine
Torque specifications for 3.6L Engine
3.6l Engine
Torque specifications for 3.6L Engine
Cylinder Head and Valvetrain
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
100 ft-lbs (136 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
130 ft-lbs (176 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
2 Camshaft Sprocket Bolt
M10 x 1.5
2
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Accessory Drive System
1 Serpentine/Accessory Drive Belt Tensioner Bolt
M12 x 1.5
1
Serpentine/Accessory Drive Belt Tensioner Bolt
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
2 Drive Belt Idler Pulley Bolt
M14 x 2.0
2
Drive Belt Idler Pulley Bolt
M14 x 2.0
Torque Specification
45 ft-lbs (61 N·m)
Engine Mounts and Oil System
1 Engine Mount Bolts
M12 x 1.5
1
Engine Mount Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
3.6l V6 Engine
Torque specifications for 3.6L-V6 Engine
3.6l V6 Engine
Torque specifications for 3.6L-V6 Engine
Cylinder Head and Valvetrain
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
100 ft-lbs (136 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
130 ft-lbs (176 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
2 Camshaft Sprocket Bolt
M10 x 1.5
2
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Accessory Drive System
1 Serpentine/Accessory Drive Belt Tensioner Bolt
M12 x 1.5
1
Serpentine/Accessory Drive Belt Tensioner Bolt
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
2 Drive Belt Idler Pulley Bolt
M14 x 2.0
2
Drive Belt Idler Pulley Bolt
M14 x 2.0
Torque Specification
45 ft-lbs (61 N·m)
Engine Mounts and Oil System
1 Engine Mount Bolts
M12 x 1.5
1
Engine Mount Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
3.7l Engine
Torque specifications for 3.7L Engine
3.7l Engine
Torque specifications for 3.7L Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Cylinder Head to Engine Block Studs
M14 x 2.0
2
Cylinder Head to Engine Block Studs
M14 x 2.0
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 2.0
1
Main Bearing Bolts
M16 x 2.0
Torque Specification
100 ft-lbs (136 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 2.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 2.5
Torque Specification
130 ft-lbs (176 N·m)
Valvetrain and Camshaft
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M12 x 1.75
1
Intake Manifold Bolts
M12 x 1.75
Torque Specification
15 ft-lbs (20 N·m)
2 Exhaust Manifold/Headers Bolts
M14 x 2.0
2
Exhaust Manifold/Headers Bolts
M14 x 2.0
Torque Specification
20 ft-lbs (27 N·m)
Accessory Components
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Throttle Body Bolts
M8 x 1.25
2
Throttle Body Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
3.7l V6 Engine
Torque specifications for 3.7L-V6 Engine
3.7l V6 Engine
Torque specifications for 3.7L-V6 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Cylinder Head to Engine Block Studs
M14 x 2.0
2
Cylinder Head to Engine Block Studs
M14 x 2.0
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 2.0
1
Main Bearing Bolts
M16 x 2.0
Torque Specification
100 ft-lbs (136 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 2.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 2.5
Torque Specification
130 ft-lbs (176 N·m)
Valvetrain and Camshaft
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
21 ft-lbs (28 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M12 x 1.75
1
Intake Manifold Bolts
M12 x 1.75
Torque Specification
15 ft-lbs (20 N·m)
2 Exhaust Manifold/Headers Bolts
M14 x 2.0
2
Exhaust Manifold/Headers Bolts
M14 x 2.0
Torque Specification
20 ft-lbs (27 N·m)
Accessory Components
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
105 in-lbs (12 N·m)
2 Throttle Body Bolts
M8 x 1.25
2
Throttle Body Bolts
M8 x 1.25
Torque Specification
105 in-lbs (12 N·m)
4.7l Engine
Torque specifications for 4.7L Engine
4.7l Engine
Torque specifications for 4.7L Engine
Cylinder Head and Valve Train
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.25
2
Rocker Arms/Shafts Bolts
M10 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
3 Valve Cover Bolts
M8 x 1.25
3
Valve Cover Bolts
M8 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Camshaft and Valve Train
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Engine Mounts and Transmission
1 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Engine Mounting Bolts
M12 x 1.5
2
Engine Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Intake and Exhaust Manifolds
1 Intake Manifold Bolts
M10 x 1.25
1
Intake Manifold Bolts
M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
2 Exhaust Manifold/Headers Bolts
M10 x 1.25
2
Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Oil and Cooling Systems
1 Oil Pan Bolts
M8 x 1.25
1
Oil Pan Bolts
M8 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
2 Water Pump Bolts
M10 x 1.25
2
Water Pump Bolts
M10 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
Fuel and Ignition Systems
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
2 Ignition Coil Bolt
M8 x 1.25
2
Ignition Coil Bolt
M8 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
4.7l V8 Engine
Torque specifications for 4.7L-V8 Engine
4.7l V8 Engine
Torque specifications for 4.7L-V8 Engine
Cylinder Head and Valve Train
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.25
2
Rocker Arms/Shafts Bolts
M10 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
3 Valve Cover Bolts
M8 x 1.25
3
Valve Cover Bolts
M8 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Camshaft and Valve Train
1 Camshaft Sprocket Bolt
M12 x 1.5
1
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Engine Mounts and Transmission
1 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Engine Mounting Bolts
M12 x 1.5
2
Engine Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Intake and Exhaust Manifolds
1 Intake Manifold Bolts
M10 x 1.25
1
Intake Manifold Bolts
M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
2 Exhaust Manifold/Headers Bolts
M10 x 1.25
2
Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Oil and Cooling Systems
1 Oil Pan Bolts
M8 x 1.25
1
Oil Pan Bolts
M8 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
2 Water Pump Bolts
M10 x 1.25
2
Water Pump Bolts
M10 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
Fuel and Ignition Systems
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
2 Ignition Coil Bolt
M8 x 1.25
2
Ignition Coil Bolt
M8 x 1.25
Torque Specification
7.5 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.
45rfe Transmission
Torque specifications for 45rfe Transmission
45rfe Transmission
Torque specifications for 45rfe Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures transmission alignment and prevents movement during operation.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Proper torque prevents oil leaks and ensures proper lubrication of transmission components.
2 Additional Transmission Oil Pan Bolts
M10 x 1.25
2
Additional Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards. Consult manufacturer's documentation for accurate information.
Transmission Drain And Fill
1 Transmission Drain and Fill Plugs
M12 x 1.5
1
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures a leak-free seal and accurate fluid level monitoring.
Transmission Filter
1 Transmission Filter Bolts
M8 x 1.25
1
Transmission Filter Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards. Consult manufacturer's documentation for accurate information.
Transmission Cooler Lines
1 Transmission Cooler Line Fittings
M12 x 1.5
1
Transmission Cooler Line Fittings
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards. Consult manufacturer's documentation for accurate information.
Transmission Solenoid Pack
1 Transmission Solenoid Pack Bolts
M8 x 1.25
1
Transmission Solenoid Pack Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards. Consult manufacturer's documentation for accurate information.
5.7l Engine
Torque specifications for 5.7L Engine
5.7l Engine
Torque specifications for 5.7L Engine
Cylinder Head and Valvetrain
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque ensures the cylinder head is securely fastened to the engine block, preventing damage, leaks, and overheating.
2 Rocker Arms/Shafts Bolts
M10 x 1.25
2
Rocker Arms/Shafts Bolts
M10 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
These bolts hold the rocker arms and shafts in place, and correct torque ensures proper valve train operation, preventing engine damage and poor performance.
3 Valve Cover Bolt
M8 x 1.25
3
Valve Cover Bolt
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. This bolt holds the valve cover in place, and proper torque prevents oil leaks and maintains engine performance.
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
These bolts hold the crankshaft in place, and correct torque is essential for proper engine operation and to prevent damage to the bearings.
2 Connecting Rod Nuts
M12 x 1.25
2
Connecting Rod Nuts
M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the connecting rods are securely attached to the crankshaft, maintaining proper piston-to-rod alignment and preventing engine damage.
Timing and Accessory Components
1 Timing Belt/Chain Tensioner Bolt
M10 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Correct torque maintains proper timing belt or chain tension, preventing engine damage and maintaining proper engine performance.
2 Water Pump Bolts
M8 x 1.25
2
Water Pump Bolts
M8 x 1.25
Torque Specification
11.5 ft-lbs (15.6 N·m)
Important Notes
Proper torque ensures the water pump is securely fastened to the engine, preventing coolant leaks and maintaining engine cooling performance.
Engine Mounts and Flywheel
1 Engine Mount Bolts
M12 x 1.5
1
Engine Mount Bolts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. These bolts hold the engine in place, and proper torque ensures the engine is securely fastened to the vehicle, preventing vibrations and noise.
2 Flywheel Bolts
M14 x 1.5
2
Flywheel Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
These bolts hold the flywheel in place, and correct torque is necessary for proper engine operation, clutch function, and to prevent damage to the engine block.
Intake and Exhaust Components
1 Intake Manifold Bolts
M10 x 1.25
1
Intake Manifold Bolts
M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures the intake manifold is securely fastened to the engine, preventing air leaks and ensuring proper engine performance.
2 Exhaust Manifold/Headers Bolts
M10 x 1.25
2
Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Correct torque prevents exhaust leaks and maintains proper exhaust system performance, reducing emissions and engine damage.
Sensors and Spark Plugs
1 Camshaft Position Sensor Bolt
M8 x 1.25
1
Camshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. This bolt holds the camshaft position sensor in place, and proper torque ensures accurate engine timing and performance.
2 Crankshaft Position Sensor Bolt
M8 x 1.25
2
Crankshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. This bolt holds the crankshaft position sensor in place, and proper torque ensures accurate engine timing and performance.
3 Spark Plugs
M14 x 1.25
3
Spark Plugs
M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque ensures the spark plugs are securely seated, maintaining proper combustion and preventing engine damage.
5.7l V8 Engine
Torque specifications for 5.7L-V8 Engine
5.7l V8 Engine
Torque specifications for 5.7L-V8 Engine
Cylinder Head and Valvetrain
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque ensures the cylinder head is securely fastened to the engine block, preventing damage, leaks, and overheating.
2 Rocker Arms/Shafts Bolts
M10 x 1.25
2
Rocker Arms/Shafts Bolts
M10 x 1.25
Torque Specification
21 ft-lbs (28 N·m)
Important Notes
These bolts hold the rocker arms and shafts in place, and correct torque ensures proper valve train operation, preventing engine damage and poor performance.
3 Valve Cover Bolt
M8 x 1.25
3
Valve Cover Bolt
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. This bolt holds the valve cover in place, and proper torque prevents oil leaks and maintains engine performance.
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
These bolts hold the crankshaft in place, and correct torque is essential for proper engine operation and to prevent damage to the bearings.
2 Connecting Rod Nuts
M12 x 1.25
2
Connecting Rod Nuts
M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the connecting rods are securely attached to the crankshaft, maintaining proper piston-to-rod alignment and preventing engine damage.
Timing and Accessory Components
1 Timing Belt/Chain Tensioner Bolt
M10 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Correct torque maintains proper timing belt or chain tension, preventing engine damage and maintaining proper engine performance.
2 Water Pump Bolts
M8 x 1.25
2
Water Pump Bolts
M8 x 1.25
Torque Specification
11.5 ft-lbs (15.6 N·m)
Important Notes
Proper torque ensures the water pump is securely fastened to the engine, preventing coolant leaks and maintaining engine cooling performance.
Engine Mounts and Flywheel
1 Engine Mount Bolts
M12 x 1.5
1
Engine Mount Bolts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. These bolts hold the engine in place, and proper torque ensures the engine is securely fastened to the vehicle, preventing vibrations and noise.
2 Flywheel Bolts
M14 x 1.5
2
Flywheel Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
These bolts hold the flywheel in place, and correct torque is necessary for proper engine operation, clutch function, and to prevent damage to the engine block.
Intake and Exhaust Components
1 Intake Manifold Bolts
M10 x 1.25
1
Intake Manifold Bolts
M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures the intake manifold is securely fastened to the engine, preventing air leaks and ensuring proper engine performance.
2 Exhaust Manifold/Headers Bolts
M10 x 1.25
2
Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Correct torque prevents exhaust leaks and maintains proper exhaust system performance, reducing emissions and engine damage.
Sensors and Spark Plugs
1 Camshaft Position Sensor Bolt
M8 x 1.25
1
Camshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. This bolt holds the camshaft position sensor in place, and proper torque ensures accurate engine timing and performance.
2 Crankshaft Position Sensor Bolt
M8 x 1.25
2
Crankshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. This bolt holds the crankshaft position sensor in place, and proper torque ensures accurate engine timing and performance.
3 Spark Plugs
M14 x 1.25
3
Spark Plugs
M14 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque ensures the spark plugs are securely seated, maintaining proper combustion and preventing engine damage.
545rfe Transmission
Torque specifications for 545rfe Transmission
545rfe Transmission
Torque specifications for 545rfe Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures proper alignment and prevents movement that could cause damage to the transmission or surrounding components.
Transmission Oil System
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
7.5 ft-lbs (12 N·m)
Important Notes
Proper torque prevents oil leaks and ensures the transmission is properly lubricated.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M14 x 1.5
1
Transmission Drain and Fill Plugs
M14 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures a leak-free seal and prevents damage to the transmission or surrounding components.
Torque Converter
1 Torque Converter Bolts
M10 x 1.5
1
Torque Converter Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Proper torque is critical to prevent damage to the torque converter, transmission, or engine. (Estimated value)
Transmission Cooler System
1 Transmission Cooler Line Fittings
M12 x 1.5
1
Transmission Cooler Line Fittings
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque ensures a leak-free seal and prevents damage to the transmission cooler or surrounding components. (Estimated value)
Transmission Crossmember
1 Transmission Crossmember Bolts
M14 x 1.5
1
Transmission Crossmember Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures proper alignment and support for the transmission. (Estimated value)
Transmission Bellhousing
1 Transmission Bellhousing Bolts
M12 x 1.5
1
Transmission Bellhousing Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures proper alignment and prevents movement that could cause damage to the transmission or surrounding components. (Estimated value)
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension and Steering
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Secure the strut/shock absorber to the vehicle's body.
2 Control Arm Bolts
M14 x 1.5
2
Control Arm Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Attach the control arms to the vehicle's body.
3 Ball Joint Nut
M16 x 1.5
3
Ball Joint Nut
M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Secure the ball joint to the control arm.
4 Tie Rod End Nut
M16 x 1.5
4
Tie Rod End Nut
M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Secure the tie rod end to the steering gear.
5 Sway Bar Link Nut
M14 x 1.5
5
Sway Bar Link Nut
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Secure the sway bar link to the vehicle's body.
6 Steering Gear/Rack Bolts
M14 x 1.5
6
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Secure the steering gear/rack to the vehicle's body.
Body and Frame
1 Body Mount Bolts
M12 x 1.5
1
Body Mount Bolts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Secure the vehicle's body to the frame.
2 Bumper Mounting Bolts
M10 x 1.5
2
Bumper Mounting Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Secure the bumper to the vehicle's body.
Doors and Hood
1 Door Hinge Bolts
M8 x 1.25
1
Door Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Secure the doors to the vehicle's body.
2 Hood Hinge Bolts
M8 x 1.25
2
Hood Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Secure the hood to the vehicle's body.
3 Trunk Lid Hinge Bolts
M8 x 1.25
3
Trunk Lid Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Secure the trunk lid to the vehicle's body.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper Assembly
1 Brake Caliper Bolts
M14 x 1.5
1
Brake Caliper Bolts
M14 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Brake Rotor/Disc Assembly
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
85 ft-lbs (115 N·m)
Wheel Assembly
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
130 ft-lbs (176 N·m)
Brake Master Cylinder and Booster Assembly
1 Brake Master Cylinder Mounting Bolts
M8 x 1.25
1
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on general industry standards.
2 Brake Booster Mounting Bolts
M8 x 1.25
2
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated value based on general industry standards.
ABS Module and Brake Line Fittings
1 ABS Module Mounting Bolts
M6 x 1.0
1
ABS Module Mounting Bolts
M6 x 1.0
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value based on general industry standards.
2 Brake Line Fittings
M10 x 1.25
2
Brake Line Fittings
M10 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value based on general industry standards.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Proper torque ensures the bearings are seated correctly and prevents damage to the engine.
2 Crankshaft Bolt
M18 x 1.5
2
Crankshaft Bolt
M18 x 1.5
Torque Specification
1. 150 ft-lbs (203 N·m)
2. 200 ft-lbs (271 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's specifications or a reliable repair manual for accurate information.
Flywheel and Transmission
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Proper torque ensures the flywheel is securely attached and prevents it from coming loose.
2 Transmission Mounting Bolts
M10 x 1.5
2
Transmission Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque ensures the transmission is securely attached and prevents damage to the transmission or surrounding components.
Drivetrain and Axles
1 Drive Axle/Half Shaft Bolts
M14 x 1.5
1
Drive Axle/Half Shaft Bolts
M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Proper torque ensures the axles are securely attached and prevents damage to the drivetrain.
2 CV Joint/Axle Nut
M20 x 1.5
2
CV Joint/Axle Nut
M20 x 1.5
Torque Specification
185 ft-lbs (251 N·m)
Important Notes
Proper torque ensures the CV joint is securely attached and prevents damage to the drivetrain.
Differential and Transfer Case
1 Differential Cover Bolts
M10 x 1.5
1
Differential Cover Bolts
M10 x 1.5
Torque Specification
1. 30 ft-lbs (41 N·m)
2. 40 ft-lbs (54 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's specifications or a reliable repair manual for accurate information.
2 Differential Drain/Fill Plug
M12 x 1.5
2
Differential Drain/Fill Plug
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Proper torque ensures the plug is securely attached and prevents leaks.
3 Transfer Case Mounting Bolts
M12 x 1.5
3
Transfer Case Mounting Bolts
M12 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m)
2. 60 ft-lbs (81 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's specifications or a reliable repair manual for accurate information.
4 Transfer Case Drain/Fill Plug
M10 x 1.5
4
Transfer Case Drain/Fill Plug
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures the plug is securely attached and prevents leaks.
Driveshaft and Center Bearing
1 Propeller/Drive Shaft Bolts
M12 x 1.5
1
Propeller/Drive Shaft Bolts
M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque ensures the driveshaft is securely attached and prevents damage to the drivetrain.
2 Driveshaft Center Bearing Bolts
M10 x 1.5
2
Driveshaft Center Bearing Bolts
M10 x 1.5
Torque Specification
1. 30 ft-lbs (41 N·m)
2. 40 ft-lbs (54 N·m)
Important Notes
Estimated torque value range. Consult manufacturer's specifications or a reliable repair manual for accurate information.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Engine Electrical Components
1 Starter Motor Mounting Bolts
M12 x 1.5
1
Starter Motor Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2 Alternator Mounting Bolts
M12 x 1.5
2
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
3 Ignition Coil Mounting Bolts
M8 x 1.25
3
Ignition Coil Mounting Bolts
M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value based on general industry standards. Consult the component manufacturer's recommendations for the correct torque value.
Battery and Electrical Connectors
1 Battery Terminal Nuts
M6 x 1
1
Battery Terminal Nuts
M6 x 1
Torque Specification
5.8 ft-lbs (8 N·m)
2 Fuel Pump Electrical Connector Bolts
M4 x 0.7
2
Fuel Pump Electrical Connector Bolts
M4 x 0.7
Torque Specification
0.83 ft-lbs (1.1 N·m)
Important Notes
Estimated value based on general industry standards. Consult the component manufacturer's recommendations for the correct torque value.
3 A/C Compressor Electrical Connector Bolts
M4 x 0.7
3
A/C Compressor Electrical Connector Bolts
M4 x 0.7
Torque Specification
0.83 ft-lbs (1.1 N·m)
Important Notes
Estimated value based on general industry standards. Consult the component manufacturer's recommendations for the correct torque value.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Exhaust Gas Recirculation (EGR) System
1 EGR Valve Bolts
M10 x 1.5
1
EGR Valve Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque is necessary to ensure a secure connection and prevent leaks.
Catalytic Converter System
1 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.75
1
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.75
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque is essential to ensure a secure connection and prevent leaks.
Oxygen Sensor System
1 Oxygen Sensor Bolts
M8 x 1.25
1
Oxygen Sensor Bolts
M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on industry standards. Proper torque is essential to ensure a secure connection and accurate readings.
2 Heated Oxygen Sensor (HO2S) Bolts
M8 x 1.25
2
Heated Oxygen Sensor (HO2S) Bolts
M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on industry standards. Proper torque is essential to ensure a secure connection and accurate readings.
Exhaust Manifold/Headers System
1 Exhaust Manifold/Headers to Cylinder Head Bolts (near oxygen sensor location)
M10 x 1.5
1
Exhaust Manifold/Headers to Cylinder Head Bolts (near oxygen sensor location)
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque is essential to ensure a secure connection and prevent leaks.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold and Headers
1 Exhaust Manifold/Headers to Engine Block Bolts
M10 x 1.5
1
Exhaust Manifold/Headers to Engine Block Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.5
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Exhaust Pipe and Connections
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
3 Muffler to Exhaust Pipe Bolts
M10 x 1.5
3
Muffler to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Exhaust System Mounting and Hangers
1 Exhaust System Mounting Bracket Bolts
M12 x 1.75
1
Exhaust System Mounting Bracket Bolts
M12 x 1.75
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general industry standards.
2 Exhaust System Hanger Bolts
M10 x 1.5
2
Exhaust System Hanger Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.
Heat Shields and Oxygen Sensors
1 Heat Shield Bolts
M8 x 1.25
1
Heat Shield Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.
2 Oxygen Sensor Bolts
M10 x 1.5
2
Oxygen Sensor Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on general industry standards.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail and Injector Subsystem
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
9.4 ft-lbs (12 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
9.4 ft-lbs (12 N·m)
Fuel Pump and Filter Subsystem
1 Fuel Pump Mounting Bolts
M10 x 1.5
1
Fuel Pump Mounting Bolts
M10 x 1.5
Torque Specification
9.4 ft-lbs (12 N·m)
2 Fuel Filter Bolt/Nut
M12 x 1.75
2
Fuel Filter Bolt/Nut
M12 x 1.75
Torque Specification
9.4 ft-lbs (12 N·m)
Fuel Tank and Filler Neck Subsystem
1 Fuel Tank Strap Bolts
M14 x 2.0
1
Fuel Tank Strap Bolts
M14 x 2.0
Torque Specification
40 ft-lbs (54 N·m)
2 Fuel Filler Neck Bolts
M10 x 1.5
2
Fuel Filler Neck Bolts
M10 x 1.5
Torque Specification
9.4 ft-lbs (12 N·m)
Fuel Pressure Regulator and Injector O Ring Seals Subsystem
1 Fuel Pressure Regulator Mounting Bolts
M8 x 1.25
1
Fuel Pressure Regulator Mounting Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on general industry standards.
2 Fuel Injector O-Ring Seals
M6 x 1.0
2
Fuel Injector O-Ring Seals
M6 x 1.0
Torque Specification
1.1 ft-lbs (1.5 N·m)
Important Notes
Estimated value based on general industry standards.
Fuel Pump Electrical Connector Subsystem
1 Fuel Pump Electrical Connector Bolts
M4 x 0.7
1
Fuel Pump Electrical Connector Bolts
M4 x 0.7
Torque Specification
0.7 ft-lbs (1 N·m)
Important Notes
Estimated value based on general industry standards.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Ac Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
Ac Lines
1 A/C Line Fittings
M8 x 1.25
1
A/C Line Fittings
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Use a torque wrench to avoid over-tightening, which can damage the fittings.
2 A/C Refrigerant Line Clamp Bolts
M6 x 1.0
2
A/C Refrigerant Line Clamp Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards for similar components.
Ac Condenser
1 A/C Condenser Mounting Bolts
M8 x 1.25
1
A/C Condenser Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards for similar components.
Ac Evaporator
1 A/C Evaporator Mounting Bolts
M6 x 1.0
1
A/C Evaporator Mounting Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on industry standards for similar components.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Upper Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Proper torque ensures a secure mounting, preventing damage to the component and maintaining ride quality.
2 Control Arm Bolts
M14 x 1.5
2
Control Arm Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Proper torque ensures a secure mounting, preventing damage to the component and maintaining ride quality.
3 Steering Gear/Rack Bolts
M14 x 1.5
3
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Proper torque ensures a secure mounting, preventing damage to the component and maintaining proper steering alignment.
Lower Suspension
1 Ball Joint Nut
M16 x 1.5
1
Ball Joint Nut
M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Proper torque ensures a secure connection, preventing wear and tear on the ball joint and maintaining proper alignment.
2 Tie Rod End Nut
M16 x 1.5
2
Tie Rod End Nut
M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Proper torque ensures a secure connection, preventing wear and tear on the tie rod end and maintaining proper alignment.
3 Sway Bar Link Nut
M16 x 1.5
3
Sway Bar Link Nut
M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Proper torque ensures a secure connection, preventing wear and tear on the sway bar link and maintaining proper suspension stability.
Bushings and Mounts
1 Upper Control Arm Bushing Bolts
M10 x 1.5
1
Upper Control Arm Bushing Bolts
M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque ensures a secure connection, preventing wear and tear on the bushings and maintaining proper suspension alignment.
2 Lower Control Arm Bushing Bolts
M10 x 1.5
2
Lower Control Arm Bushing Bolts
M10 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque ensures a secure connection, preventing wear and tear on the bushings and maintaining proper suspension alignment.
3 Coil Spring Mounting Bolts
M12 x 1.5
3
Coil Spring Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Proper torque ensures a secure connection, preventing damage to the coil spring and maintaining proper ride quality.
4 Stabilizer Bar Mounting Bolts
M12 x 1.5
4
Stabilizer Bar Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Proper torque ensures a secure mounting, preventing damage to the component and maintaining proper suspension stability.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the torque specification for the lug nuts on a 2009-2018 Ram 1500?
Q1
What IS the torque specification for the lug nuts on a 2009-2018 Ram 1500?
150 ft-lbs (203 N-m)
Q2 What IS the recommended tightening sequence for the lug nuts on a 2009-2018 Ram 1500?
Q2
What IS the recommended tightening sequence for the lug nuts on a 2009-2018 Ram 1500?
Tighten the lug nuts in a star pattern, working your way from the inside out. Tighten each lug nut to 150 ft-lbs (203 N-m) using a torque wrench.
Q3 What IS the torque specification for the spark plugs on a 2009-2018 Ram 1500 with a 5.7L V8 engine?
Q3
What IS the torque specification for the spark plugs on a 2009-2018 Ram 1500 with a 5.7L V8 engine?
27 ft-lbs (37 N-m)
Q4 What IS the torque specification for the oil filter on a 2009-2018 Ram 1500 with a 5.7L V8 engine?
Q4
What IS the torque specification for the oil filter on a 2009-2018 Ram 1500 with a 5.7L V8 engine?
25 ft-lbs (34 N-m)
Q5 What IS the torque specification for the transmission pan bolts on a 2009-2018 Ram 1500 with a 6-speed automatic transmission?
Q5
What IS the torque specification for the transmission pan bolts on a 2009-2018 Ram 1500 with a 6-speed automatic transmission?
10 ft-lbs (14 N-m)
Q6 What type of torque wrench should I use to tighten bolts on my 2009-2018 Ram 1500?
Q6
What type of torque wrench should I use to tighten bolts on my 2009-2018 Ram 1500?
Use a high-quality torque wrench that IS calibrated to the correct torque specifications. A click-type torque wrench IS a good option, as it will make a clicking sound when the desired torque IS reached.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the 1500.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Ram 1500 Bolt Tightening Torques
This procedure provides torque specifications for a variety of components on the 2009-2018 Ram 1500.
- Refer to the torque chart in the service manual for the specific component you are working on.
- Clean and dry the bolts before applying torque.
- Use a digital torque wrench to ensure accuracy.
- Tighten bolts to the specified torque in a star pattern.
- Do not overtighten bolts, as this can damage the component.
- Re-check torque after driving 50-100 miles.
Technical Service Bulletins
TSB 18-012-16: Suspension Bolt Torque Specification Correction
2016-03-01This bulletin corrects the torque specification for the front suspension lower control arm bolts on certain 2009-2018 Ram 1500 models.
2009-2018 1500
Resolution: The torque specification for the front suspension lower control arm bolts should be 110 Nm (81 ft-lb), not 162 Nm (120 ft-lb).
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.