RAM Ram ProMaster 2014-present 3.6L V6 Engine Bolt Torque Specifications & Fastener Values
RAM Ram ProMaster 2014-present

RAM Ram ProMaster 2014-present 3.6L V6 Engine Bolt Torque Specifications

Detailed bolt torque specifications for the 3.6L V6 engine of the 2014-Present Ram ProMaster, including cylinder head, engine block, and other critical components.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Cylinder head and engine block

This subsystem includes the cylinder head, engine block, and related components.

1

Cylinder Head Bolts

M12 x 1.5
Torque Value
15 ft-lbs (20 N·m)
2

Cylinder Head Studs

M14 x 1.5
Torque Value
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.

Main bearings and crankshaft

This subsystem includes the main bearings, crankshaft, and related components.

1

Main Bearing Bolts

M16 x 1.5
Torque Value
100 ft-lbs (136 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M18 x 1.5
Torque Value
100 ft-lbs (136 N·m)

Valvetrain and timing system

This subsystem includes the valvetrain, timing system, and related components.

1

Valve Cover Bolts

M10 x 1.5
Torque Value
72 in-lbs (8 N·m)
2

Timing Belt/Chain Tensioner Bolt

M12 x 1.5
Torque Value
27 ft-lbs (37 N·m)
3

Camshaft Sprocket Bolt

M14 x 1.5
Torque Value
75 ft-lbs (102 N·m)

Engine mounts and transmission

This subsystem includes the engine mounts, transmission, and related components.

1

Engine Mounting Bolts

M14 x 1.5
Torque Value
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
2

Engine Block to Transmission Bellhousing Bolts

M16 x 1.5
Torque Value
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on industry standards.

Accessory drive system

This subsystem includes the accessory drive system, including the serpentine belt and related components.

1

Accessory Drive Belt Tensioner Pulley Bolt

M12 x 1.5
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on industry standards.

Intake and exhaust system

This subsystem includes the intake and exhaust system, including the intake manifold, exhaust manifold, and related components.

1

Intake Manifold Bolts

M10 x 1.5
Torque Value
18 ft-lbs (24 N·m)
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Value
26 ft-lbs (35 N·m)

Fuel system

This subsystem includes the fuel system, including the fuel rail, fuel injectors, and related components.

1

Fuel Rail Bolts

M10 x 1.5
Torque Value
89 in-lbs (10 N·m)
2

Fuel Injector Bolts

M10 x 1.5
Torque Value
89 in-lbs (10 N·m)

Ignition system

This subsystem includes the ignition system, including the spark plugs, ignition coil, and related components.

1

Spark Plugs

M14 x 1.25
Torque Value
20 ft-lbs (27 N·m)
2

Ignition Coil Bolt

M10 x 1.5
Torque Value
72 in-lbs (8 N·m)

Cooling system

This subsystem includes the cooling system, including the water pump, thermostat housing, and related components.

1

Water Pump Bolts

M10 x 1.5
Torque Value
18 ft-lbs (24 N·m)
2

Thermostat Housing Bolts

M10 x 1.5
Torque Value
18 ft-lbs (24 N·m)

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the importance of proper torque specs for the 3.6L-V6 engine?

Proper torque specs ensure that the engine's components are securely fastened, preventing damage from vibration, heat, and stress. Incorrect torque can lead to premature wear, leaks, or even engine failure. Always consult the manufacturer's specifications and use a torque wrench to ensure accuracy.

Q2

How often should I check and maintain the engine's bolt torque specs?

It's recommended to check the torque specs during routine maintenance, such as oil changes or tune-ups. Additionally, if you've recently replaced any engine components or performed repairs, re-torque the bolts to the specified values. Always refer to the owner's manual or repair manual for specific guidance.

Q3

Can I use a impact wrench to tighten the engine's bolts?

No, it's not recommended to use an impact wrench to tighten the engine's bolts, as it can apply excessive force and damage the threads or strip the bolts. Instead, use a torque wrench to ensure accurate and controlled tightening.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision tool for applying accurate torque values

  • Range: 0-150 ft-lbs
  • Accuracy: ±3%
Learn more

Socket Set

A set of sockets for various bolt sizes

  • Sizes: 10mm, 12mm, 14mm
  • Material: Chrome Vanadium
Learn more

Ratchet and Extension

A ratchet and extension for reaching bolts in tight spaces

  • Ratchet: 1/2" drive
  • Extension: 6" long
Learn more
Service Procedures

Torque Specification for 3.6L V6 Engine

Procedure for applying correct torque values to engine bolts

  • Step 1: Identify the bolt type and location
  • Step 2: Apply the correct torque value using a torque wrench
  • Step 3: Verify the torque value using a secondary torque wrench
View full procedure

Engine Oil Change Procedure

Procedure for changing engine oil in a 2014-Present Ram ProMaster

  • Step 1: Warm up the engine
  • Step 2: Locate the oil drain plug
  • Step 3: Remove the oil drain plug and drain the oil
View full procedure
Technical Service Bulletins

TSB 14-001: 3.6L V6 Engine Oil Leak

2014-02-15

Technical bulletin for a known oil leak issue in the 3.6L V6 engine

2014-2015 Ram ProMaster

Resolution: Replace the engine oil pan gasket and re-torque the engine bolts

TSB 18-002: 3.6L V6 Engine Torque Specification Update

2018-05-01

Technical bulletin for an update to the torque specification for the 3.6L V6 engine

2014-Present Ram ProMaster

Resolution: Update the torque specification to the latest values and re-torque the engine bolts

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 RAM Specs. All rights reserved.

Privacy Policy Terms of Service